Rewrite your design rules with SupportFree capabilities. Watch one of our recorded training sessions to learn more about how our unique SupportFree metal 3D Printing solution will help you to drive your business success.
Webinar [On Demand]: Manufacture Anything
Watch the Webinar! At VELO3D, we enable customers to MANUFACTURE ANYTHING. We recently held a webinar with The Barnes Group Advisors for Additive Manufacturing Leaders in the industry.
Webinar [On Demand]: Advancing Metal Additive Manufacturing with VELO3D
30 Apr 2019
Join Dr. Zach Murphree, VP Technical Partnerships at VELO3D, and Eric Mutchler, DMLS Product Manager at Stratasys Direct, for a discussion on the advancements in 3d metal manufacturing that enable a higher degree of design freedom (low angle geometries, low-to-no support structures).
AMUG 2019: Manufacture Anything – VELO3D Unlocks the full potential of Additive Manufacturing
Recorded 4 Apr 2019
Dr. Zachary Murphree, VP of Technical Partnerships at VELO3D, and Scott Volk, Chief Technology Officer at Incodema3D, discuss some of the challenges facing serial production in Additive Manufacturing today and how they can be addressed with VELO3D's Sapphire and Flow solutions.
Rapid + TCT 2019: Deformation Correction and First Yield
Recorded 21 May 2019
Dr Gregory Brown, VP Process Engineering at VELO3D, discusses Deformation correction and first yield at the Rapid + TCT Conference in 2019. Recorded Session.
AMC 2019: Predictable Part Quality
Recorded 28 Aug 2019
Moving parts to manufacturing using additive has been difficult and time consuming. Today, pre-build auto-calibration, as well as in-situ monitoring of the build provides the capability to ensure build quality for volume production.
WESTEC 2019: Unlock Your Parts from the Build Plate – How to Print Free Floating Metal AM Parts
Recorded 24 Sept 2019
Support structures have been a necessary requirement for metal additive manufacturing for the past 20 years. What new benefits could you unlock if support structures were eliminated completely, and parts could be built free-floating in powder?
WESTEC 2019: Accelerate Adoption of Metal AM Without Part Redesign
Recorded 25 Sept 2019
Will Hasting, Aerospace & Motorsport Solutions Engineer, discusses the complex reality of shifting production from conventional methods to AM. Often part redesign is required, yet, by redesigning the part, it introduces a significant host of new variables. What if we did not need to redesign?
WESTEC 2019: Doubling Down on Metal AM Production – Advantages and Considerations of Multi-laser Systems
Recorded 26 Sept 2019
Additively manufactured parts for aerospace have pushed larger build envelopes and created the need for more lasers. However, multi-laser systems introduce new variables that could impact part quality. What can be done to ensure and maintain part quality for large parts in multi laser systems?